Polyaspartic floor systems built for the Blue Mountains. Diamond-ground prep, full chip broadcast, UV-stable topcoat. Owner-led installation across Eastern Oregon.
Every Blue Mountain floor is the same hand-prepped, full-flake, polyaspartic-topcoated system — specified for its environment.
Built for hot tires, road salt, and dropped tools
Full-flake polyaspartic systems for residential garages across Eastern Oregon. Diamond-ground prep, broadcast chip, hardened topcoat — finished cleanly, edge to edge.
For working spaces that take a beating
Heavier-duty floor systems for shops, outbuildings, and small commercial spaces. Designed to stand up to dragged equipment, solvent splashes, and long days on your feet.
Sealed, finished, ready for the season
Outdoor concrete coatings for residential patios — designed for freeze-thaw cycles, UV exposure, and patio-furniture wear without yellowing.
Full flake selection from our supplier — from warm earth tones to cool greys, bold accents, and tonal blends. We'll bring physical samples to your quote so you can see the real chips on real concrete before you decide.
FB-127 
FB-310 
FB-411 
FB-414 
FB-421 
FB-517 
FB-612 
FB-616 
FB-706 258 total colors available — from neutrals and earth tones to bold accents and tonal blends.
FB-101 
FB-102 
FB-103 
FB-104 
FB-105 
FB-106 
FB-107 
FB-108 
FB-109 
FB-110 
FB-111 
FB-112 
FB-113 
FB-114 
FB-115 
FB-116 
FB-117 
FB-118 
FB-119 
FB-120 
FB-121 
FB-122 
FB-123 
FB-124 
FB-125 
FB-126 FB-127 
FB-128 
FB-129 
FB-130 
FB-201 
FB-202 
FB-203 
FB-204 
FB-205 
FB-206 
FB-207 
FB-208 
FB-209 
FB-210 
FB-211 
FB-212 
FB-213 
FB-214 
FB-215 
FB-216 
FB-217 
FB-218 
FB-219 
FB-220 
FB-221 
FB-222 
FB-223 
FB-224 
FB-225 
FB-226 
FB-227 
FB-228 
FB-229 
FB-230 
FB-231 
FB-232 
FB-233 
FB-234 
FB-235 
FB-236 
FB-237 
FB-238 
FB-239 
FB-240 
FB-241 
FB-242 
FB-243 
FB-244 
FB-245 
FB-246 
FB-247 
FB-248 
FB-249 
FB-250 
FB-251 
FB-252 
FB-253 
FB-254 
FB-255 
FB-256 
FB-257 
FB-301 
FB-302 
FB-303 
FB-304 
FB-305 
FB-306 
FB-307 
FB-308 
FB-309 FB-310 
FB-311 
FB-312 
FB-313 
FB-314 
FB-315 
FB-316 
FB-317 
FB-318 
FB-319 
FB-320 
FB-321 
FB-322 
FB-323 
FB-324 
FB-325 
FB-326 
FB-327 
FB-328 
FB-329 
FB-330 
FB-332 FB-411 
FB-412 
FB-413 FB-414 
FB-416 
FB-417 
FB-418 FB-421 
FB-422 
FB-423 
FB-424 
FB-425 
FB-426 
FB-427 
FB-428 
FB-501 
FB-502 
FB-503 
FB-504 
FB-505 
FB-506 
FB-507 
FB-508 
FB-509 
FB-510 
FB-511 
FB-512 
FB-513 
FB-514 
FB-515 
FB-516 FB-517 
FB-518 
FB-519 
FB-601 
FB-602 
FB-603 
FB-604 
FB-605 
FB-606 
FB-607 
FB-608 
FB-609 
FB-610 FB-612 
FB-613 
FB-614 
FB-615 FB-616 
FB-701 
FB-702 
FB-703 
FB-704 
FB-705 FB-706 
FB-707 
FB-708 
FB-709 
FB-710 
FB-711 
FB-712 
FB-713 
FB-714 
FB-715 
FB-716 
FB-801 
FB-802 
FB-803 
FB-804 
FB-805 
FB-806 
FB-807 
FB-808 
FB-809 
FB-810 
FB-811 
FB-812 
FB-813 
FB-814 
FB-815 
FB-816 
FB-817 
FB-818 
FB-819 
FB-820 
FB-822 
FB-823 
FB-901 
FB-902 
FB-903 
FB-904 
FB-905 
FB-906 
FB-907 
FB-908 
FB-909 
FB-910 
FB-911 
FB-912 
FB-913 
FB-914 
FB-915 
FB-951 
FB-952 
FB-953 
FB-954 
FB-955 
FB-956 
FB-957 
FB-958 
FB-959 
FB-960 
FB-961 
FB-962 
FB-963 
FB-964 
FB-965 
FB-966 
FB-967 
FB-968 
FB-969 
FB-970 
FB-971 
FB-972 
FB-973 
FB-974 
FB-975 
FB-976 
FB-977 
FB-978 
FB-979 
FB-980 
FB-981 
FB-982 
FB-1001 
FB-1002 
FB-1003 
FB-1004 
FB-1005 
FB-1006 Colors are digital representations and may vary from actual flake colors. Flakes supplied by Concrete Floor Solutions.
No upgrade tiers, no premium add-ons. The same specification goes down on a single-stall garage and a 4,000 sq ft shop.
Mechanical prep — not just etching. The slab is opened up so the coating bonds to clean, profiled concrete.
Vinyl color flakes broadcast into a wet base coat for a fully covered, dimensional finish.
A polyaspartic topcoat is laid over the flake — designed to resist yellowing, scratching, and tire pickup.
Designed to help resist oil, automotive fluids, and common garage and shop chemicals.
Specified for the realities of Eastern Oregon weather — long winters, sudden warm-ups, full-sun summers.
Locally based in La Grande. Installation is owner-led, and every quote includes the warranty terms in writing.
Each step is done in sequence on a single floor. We don't run multiple jobs in parallel — when your floor is in, we're on it.
The slab gets diamond-ground with HEPA-vacuumed grinders. This opens the concrete profile so the coating can lock into clean, sound substrate.
Cracks, pits, and spalls are routed out and filled with structural repair material. The whole floor is brought to a uniform plane before any coating goes down.
A pigmented epoxy or polyaspartic base is rolled across the prepped slab — the bonding layer and color foundation for the finish.
While the base is wet, vinyl color flakes are broadcast to full rejection. Excess is collected the next day and the surface is scraped flush.
A UV-stable polyaspartic topcoat seals the floor — fast-curing, scratch- and chemical-resistant, and ready for use the next day.
We don’t do tiered packages or upsell add-ons. Every job is the same premium service from the first phone call to the last walk-through.
No quote sight unseen.
We come to your slab, measure it, and walk through the system in person. No high-pressure pitch, no "today-only" pricing — just a real look at what the floor needs.
Every detail, on paper.
Every quote is delivered in writing — the exact system, color, install window, and warranty terms spelled out. The number you sign is the number you pay.
Same hands, every floor.
Diamond grind, chip broadcast, polyaspartic topcoat — installed by Gavin with a small in-house crew. We don’t hand jobs off to subs and we don’t run a dozen at once.
Want to see the warranty language before scheduling a consult? Ask for a copy with your quote — we send it the same day.
Gavin Winegar is the founder of Blue Mountain Epoxy, based in La Grande, Oregon. He installs high-performance epoxy and polyaspartic floor systems for garages, shops, and patios across Eastern Oregon — built and finished for the climate they live in.
The work is hands-on: diamond-ground concrete prep, full chip broadcast, polyaspartic topcoat. Owner-led installation, with written warranty terms available with every quote.
Send a few details about your slab. We'll come measure, walk the floor, and write the quote — including the warranty terms — on the same visit.
La Grande, OR
Serving Eastern Oregon — call to confirm your job site.
This is a prototype site for Blue Mountain Epoxy. Phone, email, and the quote form are all live — we usually reply within a day or two.
