Questions people actually ask
The ones that come up on the phone, answered the way we would answer them standing on your slab.
- Locally Owned
- Built for Eastern Oregon
- Diamond-Ground Prep
- Polyaspartic Topcoat
- Written Warranty Available
Everything, in one place
Can you coat a floor in the winter?
Usually, yes. Polyaspartic cures at temperatures that stop an epoxy outright, which is a large part of why we run it in Eastern Oregon. An unheated garage in La Grande or an outbuilding in Cove is workable through most of the winter. What we cannot work around is a wet or frozen slab, so the honest answer for any given week is that we look at the forecast and the floor together.
How long before I can park on it?
Foot traffic is usually fine the next morning. Vehicle traffic typically takes 24 to 48 hours depending on temperature — colder means longer. We give you the actual numbers for your floor and the conditions at install, rather than a brochure figure, and they go in the quote.
Why does epoxy peel, and will this do the same thing?
Almost every peeling floor traces back to preparation, not product. A coating rolled over a sealed or acid-etched slab has nothing mechanical to grip and releases in sheets the first time a hot tire sits on it. We diamond-grind every slab instead of etching, which cuts a profile into the concrete and takes off old sealers and contamination in the same pass. That bond is the part that determines whether a floor lasts.
My slab has cracks. Is it still a candidate?
Usually. Cracks get chased out and filled as part of prep rather than coated over — a crack that still moves under a coating will telegraph through the finish within a season. Control joints are a different thing and get respected rather than filled flat. What we do want to look at in person is whether a crack is stable or still moving, because that changes the answer.
What is the difference between epoxy and polyaspartic?
Epoxy is the older chemistry — it builds thick and cheap, but it ambers in UV, it is brittle through a freeze-thaw cycle, and it needs warmth to cure. Polyaspartic stays flexible, holds color in sunlight, and cures cold. We use a pigmented base coat with a polyaspartic topcoat over the flake, which is where the durability actually comes from. The business is called Blue Mountain Epoxy because that is the word people search for, but the system we install is polyaspartic.
How long does a floor take?
A standard two-car garage is typically a single day, start to finish, with the floor walkable that evening. Larger shop floors and farm buildings run longer, and outdoor work depends on the weather window. Wallowa County jobs are scheduled as full days rather than split visits, because the drive over the hill makes coming back mid-cure impractical.
Do you charge for a quote?
No. We come out, measure, walk the floor with you, and write the quote — including the warranty terms — on the same visit. If the slab is not a good candidate for a coating we will tell you that on site rather than quote it anyway.
How far do you travel?
Union County is home ground, and we regularly work Baker City, Pendleton, and the Wallowa Valley — Enterprise, Joseph, and Wallowa. Anything past that, call and ask. Longer drives get block-scheduled with other jobs in the same area, so mentioning where you are when you first call helps us line it up.
What does a floor cost?
It depends on square footage and, more than anything, on the condition of the slab — a clean newer pour and a contaminated forty-year-old shop floor are very different amounts of prep. That is why the quote happens on site rather than over the phone. What we will not do is quote a number, start the job, and then find the prep.
How do I clean it?
Sweep or dust mop for the day-to-day, and a damp mop with a neutral cleaner when it needs more. Skip anything citrus-based or strongly acidic. A full-flake finish hides the ordinary scuffing that shows up immediately on a solid color, which is part of why we broadcast to refusal rather than speckling it.
Built into
every floor.
No upgrade tiers, no premium add-ons. The same specification goes down on a single-stall garage and a 4,000 sq ft shop.
Diamond-Ground Concrete Prep
Mechanical prep — not just etching. The slab is opened up so the coating bonds to clean, profiled concrete.
Full Chip Broadcast
Vinyl color flakes broadcast into a wet base coat for a fully covered, dimensional finish.
UV-Stable Polyaspartic Topcoat
A polyaspartic topcoat is laid over the flake — designed to resist yellowing, scratching, and tire pickup.
Stain & Chemical Resistant
Designed to help resist oil, automotive fluids, and common garage and shop chemicals.
Designed for Freeze-Thaw
Specified for the realities of Eastern Oregon weather — long winters, sudden warm-ups, full-sun summers.
Locally Owned, Owner-Led
Locally based in La Grande. Installation is owner-led, and every quote includes the warranty terms in writing.
Where we install
Based in La Grande, working across 4 counties. If you are outside this list, call and ask — the answer is often yes.
- La Grande Our home town Union
- Island City About 5 minutes from La Grande Union
- Cove About 20 minutes from La Grande Union
- Union About 20 minutes from La Grande Union
- Imbler About 20 minutes from La Grande Union
- Elgin About 25 minutes from La Grande Union
- North Powder About 25 minutes from La Grande Union
- Baker City About 45 minutes from La Grande Baker
- Wallowa About 50 minutes from La Grande Wallowa
- Pendleton About 55 minutes from La Grande Umatilla
- Enterprise About 1 hr 5 min from La Grande Wallowa
- Joseph About 1 hr 10 min from La Grande Wallowa
Free on-site quote
in Eastern Oregon.
Send a few details about your slab. We'll come measure, walk the floor, and write the quote — including the warranty terms — on the same visit.
Tell us about
the slab.
- Phone(541) 910-1544
- Text(541) 910-1544
- Emailgavin@bmepoxies.com
- Service Area
La Grande, OR
Serving Eastern Oregon — call to confirm your job site.
Got it.
Your details are on their way to Gavin. We'll get back to you within a day or two — usually sooner.