Skip to content
Services

Patio & Outdoor Concrete

Outdoor concrete coatings specified for Eastern Oregon sun, rain, and a real winter — sealed, finished, and ready for the season.

  • Locally Owned
  • Built for Eastern Oregon
  • Diamond-Ground Prep
  • Polyaspartic Topcoat
  • Written Warranty Available

Outdoor concrete is a harder ask

An outdoor slab gets everything an indoor one does plus direct UV, standing water, and the full freeze-thaw cycle with nothing between it and the weather. Standard epoxy is the wrong tool here — it ambers in sunlight, sometimes within a single summer, and it is brittle enough that the expansion and contraction of an exposed slab finds its limits fast.

What we use instead

A UV-stable polyaspartic system, which is what the product was developed for. It holds color in full sun, stays flexible enough to move with the slab through a freeze cycle, and sheds water rather than holding it in the surface. Where a patio is in full afternoon sun — which in Pendleton at 1,070 feet means genuinely hot concrete — that UV stability is the whole argument.

Slip resistance and finish

A patio gets walked on barefoot and wet, so slip resistance is not optional. We texture outdoor finishes more aggressively than we would a garage, and we will walk the surface with you before the topcoat goes on so the finish matches how the space actually gets used. Color and flake blend are chosen to work with the house rather than against it.

Timing the install

Outdoor work is more weather-dependent than indoor work — we need a dry slab and a dry window, and we will not start one on a forecast we do not trust. Late spring through early fall is the realistic season for patios in this part of the state. Booking ahead of the season is worth doing, because the good weeks fill.

System

Built into
every floor.

No upgrade tiers, no premium add-ons. The same specification goes down on a single-stall garage and a 4,000 sq ft shop.

01

Diamond-Ground Concrete Prep

Mechanical prep — not just etching. The slab is opened up so the coating bonds to clean, profiled concrete.

02

Full Chip Broadcast

Vinyl color flakes broadcast into a wet base coat for a fully covered, dimensional finish.

03

UV-Stable Polyaspartic Topcoat

A polyaspartic topcoat is laid over the flake — designed to resist yellowing, scratching, and tire pickup.

04

Stain & Chemical Resistant

Designed to help resist oil, automotive fluids, and common garage and shop chemicals.

05

Designed for Freeze-Thaw

Specified for the realities of Eastern Oregon weather — long winters, sudden warm-ups, full-sun summers.

06

Locally Owned, Owner-Led

Locally based in La Grande. Installation is owner-led, and every quote includes the warranty terms in writing.

Process

Five steps,
one slab at a time.

Each step is done in sequence on a single floor. We don't run multiple jobs in parallel — when your floor is in, we're on it.

  1. 01

    Grind

    The slab gets diamond-ground with HEPA-vacuumed grinders. This opens the concrete profile so the coating can lock into clean, sound substrate.

  2. 02

    Repair

    Cracks, pits, and spalls are routed out and filled with structural repair material. The whole floor is brought to a uniform plane before any coating goes down.

  3. 03

    Base Coat

    A pigmented epoxy or polyaspartic base is rolled across the prepped slab — the bonding layer and color foundation for the finish.

  4. 04

    Chip Broadcast

    While the base is wet, vinyl color flakes are broadcast to full rejection. Excess is collected the next day and the surface is scraped flush.

  5. 05

    Polyaspartic Topcoat

    A UV-stable polyaspartic topcoat seals the floor — fast-curing, scratch- and chemical-resistant, and ready for use the next day.

FAQ

Patio & Outdoor Concrete — questions

Why does epoxy peel, and will this do the same thing?

Almost every peeling floor traces back to preparation, not product. A coating rolled over a sealed or acid-etched slab has nothing mechanical to grip and releases in sheets the first time a hot tire sits on it. We diamond-grind every slab instead of etching, which cuts a profile into the concrete and takes off old sealers and contamination in the same pass. That bond is the part that determines whether a floor lasts.

How do I clean it?

Sweep or dust mop for the day-to-day, and a damp mop with a neutral cleaner when it needs more. Skip anything citrus-based or strongly acidic. A full-flake finish hides the ordinary scuffing that shows up immediately on a solid color, which is part of why we broadcast to refusal rather than speckling it.

Service area

Where we install

Based in La Grande, working across 4 counties. If you are outside this list, call and ask — the answer is often yes.

  • La Grande Our home town Union
  • Island City About 5 minutes from La Grande Union
  • Cove About 20 minutes from La Grande Union
  • Union About 20 minutes from La Grande Union
  • Imbler About 20 minutes from La Grande Union
  • Elgin About 25 minutes from La Grande Union
  • North Powder About 25 minutes from La Grande Union
  • Baker City About 45 minutes from La Grande Baker
  • Wallowa About 50 minutes from La Grande Wallowa
  • Pendleton About 55 minutes from La Grande Umatilla
  • Enterprise About 1 hr 5 min from La Grande Wallowa
  • Joseph About 1 hr 10 min from La Grande Wallowa
Forested mountains in Eastern Oregon
Get a quote

Free on-site quote
in Eastern Oregon.

Send a few details about your slab. We'll come measure, walk the floor, and write the quote — including the warranty terms — on the same visit.

Start a Quote
Contact

Tell us about
the slab.

Have photos you'd like to share?

Optional — up to 5 photos of the floor, 10 MB each.

By submitting, you agree to our Privacy Policy and Terms.